In this article, you will know about the best stabilizer for 1.5-ton inverter AC. Your inverter AC has a compressor that works differently.
The complex functioning of the inverter compressor is controlled by sophisticated electronic circuitry & PCB modules that are highly sensitive to voltage fluctuations. As we know that copper stabilizers for 1.5-ton AC will be the best option for safety purposes.
{tocify} $title={Table of Contents}
These components operate efficiently between the 180V – 240V range. Any voltage supply beyond this range can cause significant damage to circuitry and PCBs that are highly expensive to repair. So, we need to choose an automatic voltage stabilizer for home use.
Copper Winding and loaded with amazing functions like high voltage cut-off protection that protects connected equipment from dangerous voltage fluctuations. So, we need to choose the best AC stabilizer for low voltage.
V-Guard and Microtek brand stabilizers are the best for 1.5-ton inverter AC.
Why inverter ac is needed with a stabilizer?
To protect your inverter AC from damage due to voltage fluctuation.
Can we use AC without a stabilizer?
Sure, you can use AC without stabilizer but at your own risk. In the absence of a stabilizer, AC will function fine so long there is no voltage fluctuation. The stabilizer does not do anything but regulates the voltage as required to feed a load.
What is the cost of an AC stabilizer?
In the market AC stabilizer available in the range of Rs.1500 to Rs.4000.
What is the benefit of dual inverter AC?
Dual inverters offer better cooling in terms of precision in temperature control due to variable tonnage and speed of cooling. Dual inverters boast a greater amount of energy-efficient output over normal inverter ACs.
What is the disadvantage of inverter AC?
If an inverter AC has a lower capacity than the requirement, the compressor runs at higher speeds for a longer duration of time thereby increasing power consumption. On the other hand, if an inverter AC has a higher capacity than heat load, it will run for short cycles and render the room over cooled and uncomfortable.
These components operate efficiently between the 180V – 240V range. Any voltage supply beyond this range can cause significant damage to circuitry and PCBs that are highly expensive to repair. So, we need to choose an automatic voltage stabilizer for home use.
Copper Winding and loaded with amazing functions like high voltage cut-off protection that protects connected equipment from dangerous voltage fluctuations. So, we need to choose the best AC stabilizer for low voltage.
List of the Top 10 Best Stabilizers for 1.5-Ton Inverter AC in India 2021.
| Product Name | Capacity | Warranty | At Amazon |
|---|---|---|---|
| V-Guard i4 Dura 2040 Stabilizer (160V to 280V) | 1.5 Ton | 3 Years | Check on Amazon |
| V-Guard AD4 Volta 3030 Stabilizer (150V-290V) | 1.5 Ton | 3 Years | Check on Amazon |
| Microtek EM4130+ Automatic Voltage Stabilizer (130V-300V) | 1.5 Ton | 3 Years | Check on Amazon |
| V Guard AC Stabilizer -VWI 400 (130V to 280V) | 1.5 Ton | 3 Years | Check on Amazon |
| V-Guard VIG 400 Stabilizer (170V-280V) | 1.5 Ton | 3 Years | Check on Amazon |
| V-Guard iD4 Dura 2040 Stabilizer (160V to 280V) | 1.5 Ton | 3 Years | Check on Amazon |
| Snowbird Microtek Em4150 Digital Voltage Stabilizer (150-280V) | 1.5 Ton | 3 Years | Check on Amazon |
| Spartan Microtek EM4150+ Digital Voltage Stabilizer (150-280V) | 1.5 Ton | 3 Years | Check on Amazon |
| V-Guard VWR 400 Voltage Stabilizer (130V-300V) | 1.5 Ton | 3 Years | Check on Amazon |
| Microtek EM5170+ Automatic Voltage Stabilizer | 2 Ton | 3 Years | Check on Amazon |
Collection of Best Stabilizer for 1.5 Ton Inverter AC in India.
#1 V-Guard i4 Dura 2040 Stabilizer (160V to 280V)
Key Specifications:-
- It has LED Indication.
- (160V to 280V) Wide Working Range
- Intelligent Time Delay System Feature.
- Built-in thermal overload protection for safety purposes.
- Advanced IC technology design for more advancement.
#2 V-Guard AD4 Volta 3030 Stabilizer (150V-290V)
Key Specifications:-
- Best stabilizer for 1.5 Ton AC
- Best working range of the AC is 150-290 V
- Seven Segment Digital Display; Microcontrolled operation
- Smart output voltage correction; Wide input range; Built-in thermal overload protection
- Fail-safe circuit design; Low & High Voltage cut off; Initial Time Delay.
#3 Microtek EM4130+ Automatic Voltage Stabilizer (130V-300V)
Key Specifications:-
- Ideal protection for Air Conditioners up to 1.5 ton against voltage fluctuations
- With Save Power Technology
- Microtek stabilizer provides high Performance
- Routinely Steps Up and Steps Down Output Voltage according to the input voltage
- Automatically cuts the grid supply during power cuts and fluctuations
- Advanced Seven Segment Digital Display that indicates Input and Output Voltage
- An ergonomic wall mounting design for easy installation
#4 V Guard AC Stabilizer -VWI 400 (130V to 280V)
Key Specifications:-
- Working range-130V to 280V- Maximum output restricted up to 240V
- Capacity-12 amps
- Fire retardant ABS cabinet with wall mounting
- Generator Compatability
- Warranty- 3 Years V-Guard India Domestic Warranty.
#5 V-Guard VIG 400 Stabilizer (170V-280V)
Key Specifications:-
- Specially designed for Inverter AC up to 1.5 Ton,
- Used for air conditioner 1 ton.
- Air conditioner up to 1.5 tons.
- Color: White With Surge Protection.
- 170-270 volts power requirements
FAQ about inverter AC stabilizer:-
Which stabilizer is best for 1.5-ton inverter AC?V-Guard and Microtek brand stabilizers are the best for 1.5-ton inverter AC.
Why inverter ac is needed with a stabilizer?
To protect your inverter AC from damage due to voltage fluctuation.
Can we use AC without a stabilizer?
Sure, you can use AC without stabilizer but at your own risk. In the absence of a stabilizer, AC will function fine so long there is no voltage fluctuation. The stabilizer does not do anything but regulates the voltage as required to feed a load.
What is the cost of an AC stabilizer?
In the market AC stabilizer available in the range of Rs.1500 to Rs.4000.
What is the benefit of dual inverter AC?
Dual inverters offer better cooling in terms of precision in temperature control due to variable tonnage and speed of cooling. Dual inverters boast a greater amount of energy-efficient output over normal inverter ACs.
What is the disadvantage of inverter AC?
If an inverter AC has a lower capacity than the requirement, the compressor runs at higher speeds for a longer duration of time thereby increasing power consumption. On the other hand, if an inverter AC has a higher capacity than heat load, it will run for short cycles and render the room over cooled and uncomfortable.